Xerox Versant 3100 Press Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 170

Xerox Versant 3100 Press Скачать руководство пользователя страница 67

Glossy Paper

Guidelines for Printing on Glossy Paper

Glossy Paper is a type of coated paper that can be printed from all trays.

Always refer to the following guidelines before using glossy paper:

• Select Coated as the Paper Type, and select the tray containing the glossy paper as

the Paper Source.

• Select the correct Paper Weight and Size.
• Do not open sealed packages of glossy paper until you are ready to load them into

the press.

• Store glossy paper flat in the original packaging.
• Remove all other paper from the tray before loading glossy paper.
• Load only the amount of glossy paper you plan to use, and remove the unused portion

from the tray when you are finished printing.

• Replace the unused portion in the original wrapper and seal for later use.
• Rotate stock frequently.
• Long periods of storage in extreme conditions can cause glossy paper to curl and jam

in the press.

Postcards

Guidelines for Printing on Postcards

Always refer to the following guidelines before using postcard stock:

Tip

When printing postcards in Trays 6 or 7, the Postcard Bracket is required. Always install
the postcard bracket before loading and printing postcards from these trays.

• Postcards may be printed from Trays 5, 6 and 7.
• Do not open sealed packages of postcard stock until you are ready to load them into

the press.

• Store postcard stock flat in the original packaging.
• Remove all other paper from the tray before loading postcard stock.
• Load only the amount of postcard stock you plan to use, and remove the unused

portion from the tray when you are finished printing.

• Replace the unused portion in the original wrapper and seal for later use.
• If using Trays 6 or 7, always remove and store the Postcard Bracket when you are

finished printing.

• Rotate the postcard stock frequently.
• Long periods of storage in extreme conditions can cause postcard stock to jam in the

press.

• When submitting your print file, from either the Stock Library Manager or from your

print driver, select the following options:

5-29

Xerox

®

Versant

®

3100 Press

User Guide

Paper and Media

«
...
65
66
67
68
69
...
»

Содержание Versant 3100 Press











































































































































































Отзывы:

Нет отзывов