Xerox QLS-8100XE Скачать руководство пользователя страница 74

Страница: 74 / 185

4-28

Keypad controls and menus

Press the SELECT key. A message will be displayed to confirm Pull Back
operation.

Press the SELECT key.

The printer will begin rewinding media until the last unprinted label is
positioned just behind the media sensor.

If a Pull Back operation has been requested and a print batch has not
been sent to the printer or the media has been moved in any way (i.e.
Form Feed, Calibrate, Test Print, etc.) the following error message will be
displayed.

To activate media pull back with the FORM FEED button:

While the printer is in a Ready state, press the FORM FEED key.

The printer will begin rewinding media until the last unprinted label is
positioned just behind the media sensor.

Note:

The FORM FEED key will activate the pull back feature only when

the printer is in the Ready state. If the printer is paused, the FORM FEED
key will operate normally, advancing the media when pressed.

Pull Back Off

Media Moved / No Batch

Pull Back Off

Media Moved / No Batch

Pull Back

SELECT to confirm

Содержание QLS-8100XE


























































































































































































Результаты поиска

Содержание QLS-8100XE

Отзывы:

Бренды по названию

Популярные бренды

Xerox QLS-8100XE, Инструкция по эксплуатации и установке

Результаты поиска

Содержание QLS-8100XE

Отзывы:

Бренды по названию

Популярные бренды