Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 137 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-59
OS2610 Improper ink-name list specification
The ink-name list you have specified does not conform to ink-name
list syntax. For example, you may have used double instead of single
quotes to identify the ink-names.
Action Check the specified ink-names and retry the job.
OS2611 More than 64 ink-names specified
The ink-name list you have specified contains more than 64 ink-
names, the system‘s limit.
Action Restructure your commands to contain a maximum of 64 ink-names.
OS2612 Invalid filetype for ink override file name
You have entered an incorrect override file-type. Only .TMP and
.MSC files are acceptable.
Action Retry the operation, using one of these two file-types.
OS2613 Ink parameter required on sample command
You have entered a command which is missing an ink-name or a file
containing an ink-name. In other words, the INK[S] keyword is
missing parameters.
Action Re-enter the command, using the needed parameters.
OS2614 File not found
The ink-name file specified in message “OS7190 PROBLEM WITH
FILE file-name.file-type” cannot be opened.
Action Verify the file-name and file-type you have specified and retry the
command.
OS2615 File I/O error
The system cannot recognize the ink-name file specified in the
message “OS7190 PROBLEM WITH FILE file-name.file-type.”
Action Verify the file-name and file-type and retry the command.
OS2650 Status file nearly full. Execute status file save procedure. Enter
SFS clear after file save.
Very little space remains in the status file memory. When new data is
stored, the oldest report data could be lost.
Action 1. Write the current status file to magnetic tape. (Refer to your
Xerox DocuPrint 180 LPS Operations Reference chapter on
tracking system activity for additional information.)
2. Enter the SFS CLEAR command, then the SFS CREATE
command to create a new Status File.