Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 123 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-45
OS2004 Paper trays not set for same size
The length guides of the feeder trays are adjusted for different paper
lengths. Automatic switching will not be possible. (This is an
information message appearing at the start of the job.)
The printer control console displays one of the following:
BE SURE BOTH TRAYS CONTAIN THE SAME SIZE PAPER--
PRESS i
LENGTH GUIDES IN BOTH TRAYS MUST BE ADJUSTED TO THE
SAME SIZE
PAPER TRAYS ARE NOT ADJUSTED TO SAME SIZE--PRESS i
FOR MORE DETAILS
READY TO PRINT--BOTH PAPER TRAYS NOT SET FOR SAME
SIZE--PRESS i
TRAY 1 SET FOR __.__X__.__" PAPER. TRAY 2 SET FOR __.__
X__.__" PAPER
TRAY 1 SET FOR _X_MM PAPER. TRAY 2 SET FOR _X_MM
PAPER
WARMING UP--BOTH PAPER TRAYS NOT SET FOR SAME SIZE-
-PRESS i
Action If tray switching is desired, reset the paper length guides to the same
size. (Refer to the chapter on feeder trays in your Xerox DocuPrint
180 LPS Operator Guide.)
OS2005 Enter ‘CONTINUE I’ to resume input
or
Select ‘CONTINUE I’ to resume input
The input process was interrupted by the entered command or error
condition. The system is now ready to resume input.
Action Enter the CONTINUE I command to resume interrupted data
transmission.
OS2006 Enter ‘CONTINUE I’ or ‘ABORT I’.
or
Select ‘CONTINUE I’ or ‘ABORT I.’
Input was interrupted due to insufficient file space or a DJDE
processing error. The system is waiting for a command.
Action Enter the CONTINUE I command to resume input. (Some data may
be lost.)
or
Enter the ABORT I command to cancel the job.