Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 102 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-24 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1310 Number of active fonts is nn
The maximum number of fonts per print job the system will attempt
to keep in memory is (number 0-128). This message appears at
installation when font memory space is allocated.
Action None.
OS1320 Number of active graphics is nn
The maximum number of graphics per print job the system will
attempt to keep in GHO memory is (number 16-128). This message
appears at installation when graphics memory space is allocated.
Action None.
OS1321 Print darkness level is nn.
After entering the DARKNESS command with a level parameter, this
message tells you that the value you have entered is accepted. If you
enter the DARKNESS command with no parameters, the message
tells you the current level setting.
Action None.
OS1322 Lead edge screen setting is nn
This message confirms that your EDGE (lead edge screen)
command parameters have been accepted or provides you with the
current settings if you have not entered new parameters.
Action None.
OS1323 Energy saver timeout is nn minutes
After entering the ENERGY command with a timeout parameter, this
message tells you that the value you have entered is accepted. If you
enter the ENERGY command with no parameters, the message tells
you the number of minutes currently set.
Action None.
OS1324 Energy Saver mode is disabled
The energy saver has been turned off.
Action None.
OS1325 IOT Attention steady light is xxx, flashing light is xxx
After entering the ATTENTION LIGHT command, this message tells
you whether the attention light(s) on your system‘s printer is enabled
or disabled, steady or flashing. If you enter the ATTENTION LIGHT
command with no new parameters, the message provides the
current settings.
Action None.