Xerox DocuPrint 180 Скачать руководство пользователя страница 90

Страница: 90 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES

6-12

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE

OS1010

Starting job xxxx

The system is initiating processing for the indicated job.

Action

None.

OS1011

Starting diagnostic print job

The system diagnostic interface (SDI) task is involved.

Action

None.

OS1012

ALUN$ failed command ignored

The device substitution specified in the SUB DEV command has
failed. Check command and retry.

Action

None.

OS1013

Device offline, command ignored

The device substitution specified in the SUB DEV command has
failed. Check command and retry.

Action

None.

OS1014

Output cannot be switched--Selected Tray is full

The SELECT or SEPARATE command was entered while the printer
was printing. Output cannot be switched because the entered stacker
tray is full.

The printer control console displays:

OUTPUT TRAY CANNOT BE SWITCHED--SELECTED TRAY IS
FULL

Action

1. Press the <STOP> key or the Stop button on the printer to halt

printing.

2. Unload the full stacker tray.

3. Press the <CON> key to resume printing.

4. Reenter the SELECT or SEPARATE command.

OS1015

ALDN$ failed, command ignored

The device substitution specified in the SUB DEV command has
failed. Check command and retry.

Action

None.

OS1016

NT01 or staple not supported

Xerox DocuPrint 180 LPS does not support Staple. If Staple is
specified in a JDE, JDL or DJDE, then INPUT will ignore it.

Action

None.

Содержание DocuPrint 180





































































































































































































































































































































































Результаты поиска

Содержание DocuPrint 180

Отзывы:

Похожие инструкции для DocuPrint 180

Бренды по названию

Популярные бренды

Xerox DocuPrint 180, Руководство по эксплуатации

Результаты поиска

Содержание DocuPrint 180

Отзывы:

Похожие инструкции для DocuPrint 180

Бренды по названию

Популярные бренды