Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 141 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-63
OS2691 Ensure proper stock is loaded for Print Job
This message appears after print quality adjustment is completed
when STOP was specified in the PQA command, or if you have
pressed the Stop button or entered PQA CANCEL.
Action Make sure the job stock is loaded.
Note: Be aware that if you enter the PQA CANCEL command, the
housing on which PQA was being performed will not be ready.
OS2692 Empty output tray
For a two output tray system, the selected output tray must be empty
in order for print quality adjustment to start. This message appears
after print quality adjustment is completed when STOP was specified
in the PQA command.
Action None.
OS2700 Key-in lost. Reenter.
The system was unable to process the command when entered
because another ongoing process temporarily conflicted with it.
Action Wait a few seconds and reenter desired command.
OS2705 Recovery in progress... keyin not allowed.
Recovery is currently in progress. The attempted operation was
ignored.
Action Wait for recovery to complete, following any additional instructions.
OS2710 Invalid command reenter.
A command was entered that the system does not recognize, or a
command was improperly keyed in.
Action 1. Reenter the command correctly.
2. If the message reappears, the command cannot be used with
your system.
OS2711 CMD not allowed while diagnostic print job is in progress.
You have entered a command that cannot be processed because a
diagnostic print job is being run.
Action None.