Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 104 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-26 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS1335 XPS Accounting stopped: no disk space for files
XPS is unable to accumulate accounting data because there is no
disk space for files.
Action None.
OS1336 XPS Accounting enabled
XPS received a request from the server to enable accounting.
Action None.
OS1337 XPS Accounting disabled
XPS received a request from the server to disable accounting or HIP
was unloaded by entering the HIP END command.
Action None.
OS1342 Currently not in Lockout Mode
This message informs you that the LOCKOUT mode has not been
initiated.
Action None.
OS1380 Alignment is nn Scan Lines and nn Dots
Printed data will appear at the indicated number (76-260) of lines
from the top and bottom edges of paper, and the indicated number
(0-795) of dots from the right and left edges of paper.
Action None.
OS1381 Diagnostic alignment is x Scan lines and y Dots
For Xerox service personnel, this message provides alignment
information.
Action None.
OS1390 Invalid Scan or Dot value. Retry Align
The alignment number entered for dots or lines is not within the
permitted range.
Action Reenter the ALIGN command with value(s) within the range. (Refer
to the problem solving chapter in your
Xerox DocuPrint 180 LPS
Operator Guide .)
OS1391 Invalid Scan or Dot value. Retry DAlign
For Xerox service personnel, this messages indicates that incorrect
alignment values have been entered.
Action None.