Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 76 / 356

IFU (INTERPRESS FONT UTILITY) MESSAGES
5-38 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
IF8409 Missing font mapping header at file offset?
The text that was just read from the written file on the medium was
not as expected. The format of the file written by the WRITE
command is either corrupted, the READ and WRITE codes are not
being executed in sync, or a noncopy medium was loaded when a
read was attempted.
Action 1. Remount the medium (tape, floppy, etc.), making sure it is the
correct medium for READ.
or
2. Execute the corresponding WRITE command again for the
READ that failed
IF8410 Tape file buffering has failed
There is an error in the system call.
Action 1. Retry the operation.
2. If the retry fails, reboot the system.
IF8420 Internal buffer allocation failed, aborting ADD.
Memory allocation for a font file has failed.
Action Contact your systems specialist or Xerox Customer Service.
IF8500 Decomposed FIS file has bad syntax.
An error occurred while the system was processing an internal
temporary file.
Action 1. Reenter the ADD command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8501 Fatal error has been detected in font request
An error occurred while the system was processing the font request.
Action 1. Reenter the ADD command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.
IF8502 Character x returned error code y.
A character in the decomposed FIS caused an error code to appear.
Action 1. Reenter the ADD command.
2. If the problem continues, contact your systems specialist or
Xerox Customer Support.