Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 101 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-23
OS1294 Invalid paper tray selected. Command ignored
A command was entered that refers to a (feeder) tray not in the
printer configuration, e.g., (feeder) trays 3 and 4 can only be selected
when your printer has a high-capacity feeder.
Action Select a (feeder) tray that is part of your printer‘s configuration.
(Refer to the chapter on feeder trays in your
Xerox DocuPrint 180
LPS Operator Guide .)
OS1295 Destination trays not configured for this command
A command was entered that is invalid for the printer‘s stacker tray
configuration.
Action Reenter the command, using a stacker bin that your system has.
(Refer to the output tray or bin chapter in your
Xerox DocuPrint 180
LPS Operator Guide .)
OS1296 There is no stockset specified at this time
The CLUSTER SET or CLUSTER SET N/R command was entered
but the collection of stocks to be used in the print job has not been
specified. (Refer to your
Xerox DocuPrint 180 LPS PDL Reference
.)
Action Reprogram job to contain a stockset or wait until such a job is running
before entering this command.
OS1297 There are no current trays in any cluster
The CLUSTER command was entered but no clusters have been
defined.
Action Define the desired cluster. (Refer to your Xerox DocuPrint 180 LPS
Operations Reference chapter on setting up print jobs for additional
information.)
OS1298 Specified paper tray not present
A command was entered that refers to a feeder tray not in the printer
configuration.
Action Reenter the command, using a feeder tray that your system has.
(Refer to the chapter on feeder trays in your
Xerox DocuPrint 180
LPS Operator Guide .)
OS1300 Number of active forms is nn
The maximum number of forms per print job the system will attempt
to keep in forms memory is (number 0-64). This message appears at
installation when forms memory space is allocated.
Action None.