Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 132 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-54 XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS2288 WARNING: Current select command overrides data destination
value. Change Select command or Con O
The data stream contains a DESTINATION=EXPORT statement,
and the current operator SELECT keyin is other than AUTO or E.
Action 1. Change SELECT to AUTO or E to enable the Bypass Transport
as the destination.
2. Press CONTINUE to override the datastream destination and
send the paper to the operator selected destination.
OS2289 WARNING: Current feed command overrides data feed= value
A FEED cluster name command was entered calling for a different
cluster than that specified by DJDE. The system will ignore the
DJDE.
Action Press the <CON> key to resume printing and let the FEED command
override the DJDE.
or
Enter the FEED MAIN command to let the data stream (DJDE)
determine the cluster used. (Refer to your
Xerox DocuPrint 180 LPS
Operations Reference chapter on setting up print jobs for additional
information.)
OS2290 Enter ‘RETURN’ to continue cluster display
The cluster list contains more than a single display of information.
Action Press the <ENTER> or <RETURN> key to view additional displays.
OS2291 Response timeout - cluster display stopped
The CLUSTER or CLP command was used to display the cluster list
but the <ENTER> key was not pressed within a reasonable amount
of time to continue the cluster display. The cluster display has been
terminated.
Action Reenter the CLUSTER or CLP command, if desired.
OS2295 Problem with stockset, see display below
One or more clusters in the current stockset has a problem. A cluster
display follows, indicating specific errors that should be resolved
before printing. If a status is flashing, it must be resolved before you
can print.
Action 1. Correct the problem shown flashing in the status column.
2. Press the <CON> key to resume printing.