Xerox DocuPrint 180, Руководство по эксплуатации

Страница: 151 / 356

OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE 6-73
OS3005 Unusable sheets cleared to sample tray.
The printer is purging any pages that are damaged or have poor print
quality. Pages will be delivered to the sample tray and printing will
resume where it was stopped.
The printer control console displays:
PRINTER IS CLEARING UNUSABLE SHEETS
Action Discard pages delivered to the sample tray.
Note: This message may also be displayed after abnormal
termination of the previous job.
OS3006 Possible extra page in output. See printer message.
A duplex job was interrupted by a paper jam. A page printed on only
one side may have been purged by the system and sent to a stacker
tray.
The printer control console displays one of the following:
CHECK OUTPUT TRAY 1 FOR EXTRA ONE-SIDED PAGE.
PRESS i.
CHECK OUTPUT TRAY 2 FOR EXTRA ONE-SIDED PAGE.
PRESS i.
CHECK SAMPLE TRAY FOR UNUSABLE SHEETS.
Action Check stacker and sample trays for an unusable one-sided page and
discard it.
Note: This message may also be displayed after abnormal
termination of the previous job.
OS3007 Check output--Dry ink may not be sticking to paper.
The fuser may not be maintaining the temperature necessary for dry
ink to adhere to paper.
The printer control console displays:
CHECK OUTPUT. IF ACCEPTABLE, PRESS CONTINUE. IF NOT
CALL SENIOR OPERATOR.
PRINTER FAULT. DRY INK MAY NOT BE ADHERING TO PAPER.
PRESS i
Action 1. Check printed output.
2. If output is acceptable, press the <CON> key or the Continue
button on the printer to resume printing.
or
If print quality is degraded, contact your systems specialist or Xerox
Customer Service.