Xeos Alert Geomatics Resolute, Руководство пользователя

Страница: 48 / 65

Resolute User Manual Version 2.5 43
$ver
If the new version wasn’t properly uploaded resend the image.
To view all the firmware images on the Resolute, use the $imglst command.
Delete the old firmware using $imgdelete command. In this example, firmware version 4275 was
uploaded so 4262 must be the old firmware. Enter $imgdelete followed by the version number
omitting the zeroes and replacing periods with a space. For this example, the following command
would be sent to delete the old firmware:
$imgdelete 1 1 4262
Do not delete the current version of firmware.
Re-enable the GNSS functionality with the following command:
$gnsssetenabled t
If a 900 Mhz radio is installed on your unit (Resolute-PIN) re-enabled the radio as well with the
following command:
$radiosetenabled t
Units without 900 MHz radio’s installed can experience issues if the functionality is
enabled. If you have a Resolute Polar or Reference do not enabled the radio
functionality.
If your unit is equipped with a cellular or iridium tunnel it is likely possible to update your
firmware remotely. Contact Alert Geomatics for details.