Xeos Alert Geomatics Resolute, Руководство пользователя

Страница: 39 / 65

Resolute User Manual Version 2.5 34
The remainder of cell configuration is covered in the “Embedded Telemetry Data Transfer: IP
Tunnel Configuration” and “SBD and SMS and XBD Configuration” sections ahead.
Embedded Telemetry Data Transfer: IP Tunnel Configuration
Data transfer is accomplished with the embedded telemetry (Cell or Iridium) over an IP tunnel
which is simply referred to as the tunnel throughout the rest of the document. The tunnel grants
access to the embedded servers on the device and manages the connection to the Xeos Online
server. Tunnel timers are useful if you have either a Cellular or Iridium modem. The Resolute
needs to be configured with which modem should be prioritized for connections to the tunnel.
The priority list can be changed with the “$TunnelSetModem [priority] [modem]” command.
Priority 0 is the highest priority while 3 is the lowest. Most users will only Modems have the
following corresponding numbers for this command: 2: Cellular, 3: Iridium. To prioritize the cell
modem before the Iridium modem the following commands would be entered:
$TunnelSetModem 0 2
$TunnelSetModem 1 3
Tunnel timers operate the same as the GNSS timers, with enabled, duration, interval and offset.
The commands are as follows:
$TunnelSetEnabled [T/F]
$TunnelSetDuration [time]
$TunnelSetInterval [time]
$TunnelSetOffset [time]
Working Example:
A polar unit records data continuously and only needs up to one hour of Iridium RUDICS time to
transmit the collected data daily. The operators of this station need the previous 24 hours of
data to arrive at 1 PM. To configure the unit for this situation a duration 1h, an interval of 24h
and an offset of 12h is desired. The following commands would be sent to the unit:
$TunnelSetEnabled T
$TunnelSetDuration 1h
$TunnelSetInterval 24h
$TunnelSetOffset 12h
SBD and SMS and XBD Configuration
If your unit is equipped with cellular and/or Iridium modems, it is possible to use SBD (Iridium)
and/or SMS (cellular) to interrogate or configure the unit.