Xeos Alert Geomatics Resolute, Руководство пользователя

Страница: 30 / 65

Resolute User Manual Version 2.5 25
Alternatively, command line messages can be sent to configure unit signals and messages
enabled. For Iridium SBD, these are best formed on XeosOnline using the ‘admin’ option (user
must be an admin level user to see the button on the top bar).
To configure and send the command to a unit, click on the two-directional arrow button under
the Admin page next to the particular unit to open the Resolute Configuration window.
To configure the signals that are to be tracked, this command would be sent:
$gnssSetSignalTracking [signals (HEX)]. This can be formed and sent by clicking on the ‘GNSS
Signal Tracking’ tab, and checking the signals you would like to track. The command can be sent
directly to the unit through this window using the ‘send’ button.
The current settings can be recovered by using the ‘reverse hex calculator’ button on the bottom
of this window and by entering the hex bitmap in the text box from the $gnssGetSignalTracking
command. Clicking on ‘update’ option under the calculator will check the boxes of the signals
that are currently tracked.