Resolute User Manual Version 2.5
9
Test Button and LED Behavior
Test Button Operation
The test button operation is controlled by variable length button presses. Additional confirmation
feedback to these button presses is provided by the response of the LEDs. A summary table is
provided at the bottom of this subsection.
To turn on the lights, press the test button (roughly one second press). This will light up the LEDs
for the next 15 minutes. This is useful for confirming the unit is working and communicating with
the network.
Holding the test button longer than three seconds resets the unit. After three seconds of holding
the test button, the LED’s will begin to flash yellow to confirm releasing will reset the unit.
Holding the test button longer than 10 seconds will, in the case of a Base Station, reset the static
Base position and the unit. The GNSS LED flashing blue confirms this hold period. For an RTK
Rover, the GNSS LED will still flash blue, but the unit will only reset. A 10 second button press, on
a Rover will not reset the Base the Rover is communication with over radio. This operation must
be done at the base.
Holding the button for 20s cancels all the above operations and the LEDs turn off. It is safe to
release the button at that point if you did not wish to reset the unit or the base position.
Press Length Unit Response
LED indication
~1s - 3s
LEDs On
LEDs On
3s - 10s
Software Reset
Flashing Yellow LEDs
10s - 20s
Base Position Reset (Base Only) and Software Reset GNSS LED flashing blue
20s +
Cancel Above Responses
Off
LED Behavior
Confirming the correct operation of the unit is an important step in installing the unit. The LEDs
on the unit are designed to assist in this confirmation. The LEDS are automatically on after power
up for 15 minutes to assist with installation. LEDS can be reactivated with a quick 1s button push
at any point. The below table indicates the meanings of the LEDs.
Содержание Alert Geomatics Resolute
Страница 58: ...Resolute User Manual 1 4 53 Appendix C GNSS Antenna Mount Diagram Talisman Mount Diagram A 03 058...
Страница 59: ...Resolute User Manual 1 4 54 Appendix D RF Cable Installation Diagrams...
Страница 60: ...Resolute User Manual 1 4 55 Appendix E Example RTK Network Map...
Страница 61: ...Resolute User Manual 1 4 56 Appendix F Mechanical Specifications...