Maintenance
Pges
3 - 2
ba43121e03
01/2011
Note
All the menu items of the service menu cannot be displayed at the
same time (see step 4).
After calling up the
Service intervals
menu item or
AutoFlow
, you can
select the mode
Presentation of data
or
Change
each time. To change
parameters, you must enter the four-digit PIN.
Caution
If you select the
Presentation of data
mode, the analyzer module
continues to run in the background.
If you select the
Change
mode, after the identification number has
been entered, the analyzer module goes into STOP mode as important
operating parameters could be changed.
4
Move the selection to the lowest menu item with
6
and
display further menu items with
6
again.
