Pges
Operation
2 - 5
ba43121e03
01/2011
Starting the measuring
procedure
Display if the measuring
range is exceeded
TresCon Pges supplies measured values up to the double value of the
upper limit of the measuring range of 3.00 mg/L Pges. If values are
above the upper limit of the measuring range, the addition "> 3.00 mg/
L" appears in the line below.
Note
The measurement accuracy stated in the section 5 T
ECHNICAL
DATA
only applies to values within the measuring range.
1
Measuring mode
Select the TresCon Pges module: Move the arrow (cursor) with
68
to the line of the Pges analyzer module.
2
Press the
2
key. The current process (e.g. Stop,
Parameterizing, ...) is canceled, the measuring procedure
starts. If the temperature in the digestion reactor is more than
50 °C, the digestion reactor is first cooled down (display,
Cool
reactor
). The actual program sequence starts with the
Rinse
sample
display.
3
After the operating steps,
Rinse sample, Digestion
and
Reaction
, the current measured value appears on the display.
