WPI NANOLITER2020, Инструкция по эксплуатации

Страница: 6 / 44

2 World Precision Instruments
Notes and Warnings
CAUTION : Do NOT apply solvents or oils to any part of the NANOLITER2020 . Do
NOT wash or lubricate any parts of the system.
CAUTION : The NANOLITER2020 Injector Head ( 3004704 ), MICRO2T controller,
and other part are not autoclavable. Do not autoclave.
CAUTION : Sterilize the NANOLITER2020 Injector Head with EtO or by wiping the
exterior of the pumps and controller with alcohol or Cidex (WPI# 7364 ).
CAUTION : Do not disassemble unless it is discussed in the manual. There are no
serviceable parts inside either the NANOLITER2020 Injector Head ( 300704 ) or
the MICRO2T controller.
CAUTION : Always hold the NANOLITER2020 Injector Head ( 300704 ) by the main
body or the mounting bar. Do not swing it or carry it by its cable.
Parts List
After unpacking, verify that there is no visible damage to the instrument. Verify that all
items are included:
(1)
300704 NANOLITER2020 Injector head with universal adapter (500778). (The injector
comes with gaskets to use with 1.1-1.15 mm glass installed.)
Items listed below are mandatory accessories already included with the
NANOLITER2020
system that may be purchased separately. The 300704 is just the injector head and does
not include any controller or accessories.
(1)
MICRO2T SMARTouch ™ Controller with 12V Power Supply and Power Cable for 110V/220V
(1) 501981 Tweezers to scoop out the gaskets
(1) 504949 Glass Capillaries (ID: 0.530 mm, OD: 1.14 mm) pkg. of 300
(2) TIP10XV119 Micropipettes (ID: 0.530 mm, OD: 1.14 mm, Tip ID: 10 µm)
(1) 300746 Spare Parts Kit which includes:
(1) 14456 Allen wrench (0.035”) hex tool for replacing wire plunger
(1) MF34G MicroFil non-metallic filling needle, 34 gauge (used for backfilling)
(5) 300703 O-ring Kit for the NANOLITER2020
(1) 3563 1 CC Syringe
(2) 300514 Replacement Pistons for the NANOLITER2020
This Instruction Manual for the NANOLITER2020 can be downloaded at
https://www.wpiinc.com/manuals .