background image

NANOLITER 2020/200704

World Precision Instruments 

39

* Electrodes, batteries and other consumable parts are warranted for 30 days only from the date on which 

the customer receives these items.

WARRANTY

WPI (World Precision Instruments) warrants to the original purchaser that this equipment, including its 

components and parts, shall be free from defects in material and workmanship for a period of one year* 

from the date of receipt. WPI’s obligation under this warranty shall be limited to repair or replacement, at 

WPI’s option, of the equipment or defective components or parts upon receipt thereof f.o.b. WPI, Sarasota, 

Florida U.S.A. Return of a repaired instrument shall be f.o.b. Sarasota.

The above warranty is contingent upon normal usage and does not cover products which have been 

modified without WPI’s approval or which have been subjected to unusual physical or electrical stress or on 

which the original identification marks have been removed or altered. The above warranty will not apply if 

adjustment, repair or parts replacement is required because of accident, neglect, misuse, failure of electric 

power, air conditioning, humidity control, or causes other than normal and ordinary usage.

To the extent that any of its equipment is furnished by a manufacturer other than WPI, the foregoing 

warranty shall be applicable only to the extent of the warranty furnished by such other manufacturer. This 

warranty will not apply to appearance terms, such as knobs, handles, dials or the like.

WPI makes no warranty of any kind, express or implied or statutory, including without limitation any 

warranties of merchantability and/or fitness for a particular purpose. WPI shall not be liable for any damages, 

whether direct, indirect, special or consequential arising from a failure of this product to operate in the 

manner desired by the user. WPI shall not be liable for any damage to data or property that may be caused 

directly or indirectly by use of this product.

Claims and Returns

Inspect all shipments upon receipt. Missing cartons or obvious damage to cartons should be noted on the 

delivery receipt before signing. Concealed loss or damage should be reported at once to the carrier and 

an inspection requested. All claims for shortage or damage must be made within ten (10) days after receipt 

of shipment. Claims for lost shipments must be made within thirty (30) days of receipt of invoice or other 

notification of shipment. Please save damaged or pilfered cartons until claim is settled. In some instances, 

photographic documentation may be required. Some items are time-sensitive; WPI assumes no extended 

warranty or any liability for use beyond the date specified on the container

Do not return any goods to us without obtaining prior approval and instructions from our Returns 

Department. Goods returned (unauthorized) by collect freight may be refused. Goods accepted for 

restocking will be exchanged or credited to your WPI account. Goods returned which were ordered by 

customers in error are subject to a 25% restocking charge. Equipment which was built as a special order 

cannot be returned.

Repairs

Contact our Customer Service Department for assistance in the repair of apparatus. Do not return goods 

until instructions have been received. Returned items must be securely packed to prevent further damage in 

transit. The Customer is responsible for paying shipping expenses, including adequate insurance on all items 

returned for repairs. Identification of the item(s) by model number, name, as well as complete description 

of the difficulties experienced should be written on the repair purchase order and on a tag attached to the 

item.

Содержание NANOLITER2020













































Отзывы: