WPI NANOLITER2020, Инструкция по эксплуатации

Страница: 20 / 44

16 World Precision Instruments
Once the End Stop Calibration is performed, it is not necessary to do it again, even
if the pump is disconnected from the controller as long as it is re-connected to the
same channel on the same controller.
CAUTION : IF YOU SUSPECT THAT THE PUMP HAS STALLED, CHECK THE END STOP
CALIBRATION AGAIN.
2. Set Syringe : This button is not used for the NANOLITER2020 Injector.
Setting End Stop in the Nanoliter Injector
1. Power on the MICRO2T unit. The splash screen appears. Touch the screen anywhere.
The MAIN MENU appears.
Fig. 24—The Splash Screen appears on power up.
2. On the Main menu, touch the DISPLAY ALL CHANNELS button. The Syringe Status screen
appears.
Fig. 25—The Main menu allows access to the pump information and system setup options.