WPI NANOLITER2020, Инструкция по эксплуатации

Страница: 36 / 44

32 World Precision Instruments
2. When you finish setting up the pump and syringe parameters, press Back to return to
the Command screen.
Fig. 54—Pump 2 is the Master pump, and Pump 1 is the slave in this example.
3. Press Run to infuse the required volume of fluid for the injection or for multiple
injections. Both pumps will begin delivery of their sequences. Each pump will
complete delivery of its sequence unless it reaches a mechanical limit or the master
pump reaches a mechanical limit. If the master pump reaches a limit, all grouped
pumps still infusing will stop.
NOTE : When pumps are not grouped, they can be operated independently. While one
pump is running, the remaining pump can be made active and operated. The controls
change to reflect the state of the active pump.