Worthington CS200 Скачать руководство пользователя

Страница: 6 / 56

CS200

Control Systems

General

Information

• This product does not intentionally apply RF energy for its function.
• This product does not intentionally receive RF energy for its function.

The liquid level controllers used with these freezers operate from 12 VDC. Disconnect the electrical power cord

from the outlet before attempting any service.

For more detailed information concerning safety precautions and safe practices to be observed when handling

cryogenic liquids consult CGA publication P-12 “Safe Handling of Cryogenic Liquids” available from the

Compressed Gas Association: CGA website: www.cganet.com; CGA customer s1.703.788.2700; or

email [email protected].

General Information

The CS200 SERIES Control System can monitor and control both the liquid nitrogen level and the vapor

temperature range in the cryostorage unit you have selected. CS200 SERIES Control Systems are designed

to work with Worthington Industries Cryostorage Systems. The features are designed to provide a safe

environment for samples while at the same time tracking all relevant information associated with the freezer.

This control provides a complete historical record of the environment in your unit and therefore, the environment

in which your samples have been stored in this system. This controller features a vacuum fluorescent display.

The addition of a liquid nitrogen supply and inventory control racks for systematic retrieval of stored product

completes the total Cryostorage System.
Worthington Industries Cryostorage Systems are designed for applications where extremely low temperature

storage of biological products is required. They are also appropriate for industrial or other applications where

liquid nitrogen temperatures and high capacity are needed.
Before beginning installation or operation of this CS200 SERIES Control System, make sure that you read and

understand this manual as well as the operating and safety instructions for the cryostorage unit you will be

using with this controller.

Содержание CS200

























































Результаты поиска

Содержание CS200

Отзывы:

Похожие инструкции для CS200

Бренды по названию

Популярные бренды

Worthington CS200, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание CS200

Отзывы:

Похожие инструкции для CS200

Бренды по названию

Популярные бренды