Worthington CS200 Скачать руководство пользователя

Страница: 55 / 56

CS200

Control Systems

Cryowire

Network

Cryowire

Network

Cryowire

Local

Power

12 VDC, 3A

Remote

Alarm

Battery

12V, 2.5A

4075 Hamilton Blvd.

Theodore, AL 36582

WorthingtonIndustries.com

844-273-7517 / +1 614-438-7968

Warranty

Worthington Industries warrants that each of its electronic controllers and displays will be free from defects in

material and workmanship, in the normal service for which the product was manufactured, for a period of two

(2) years from the original date of purchase. Worthington Industries at its option will either repair or replace any

item covered under this warranty.

This warranty is void if the product is used for any other purpose than that for which it was designed, including

but not limited to connection with third party systems. This warranty is void if the product is in any way altered

or repaired by others. Worthington Industries and/or its suppliers shall not be liable under this warranty, or

otherwise, for defects caused by negligence, abuse or misuse of this product, corrosion, fire or the effects of

normal wear.
The remedies set forth herein are exclusive. Worthington Industries shall not be liable for any indirect or

consequential damages including, without limitation, damages relating to lost profits or loss of products,

resulting from the delivery, use or failure of the product or for any other cause. By accepting delivery of the

product, the purchaser acknowledges that this limitation of remedies is reasonable and enforceable. In no

case shall Worthington Industries’ liability exceed the purchase price for the product.

Appendix

Figure 17.0

Main Rating Label

Figure 17.1 Control & Display Label

Figure 17.2 Connector Box Label

Figure 17.3 Battery Label - (Optional)

Labels

Содержание CS200

























































Результаты поиска

Содержание CS200

Отзывы:

Похожие инструкции для CS200

Бренды по названию

Популярные бренды

Worthington CS200, Инструкция по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание CS200

Отзывы:

Похожие инструкции для CS200

Бренды по названию

Популярные бренды