manualshive.com logo in svg

Worth Data 701 RF, Руководство пользователя


Поделиться
Скачать
background image

7 

UCC/EAN Code 128 

enabling/disabling ............................................... 2-12 

UCC-128/ EAN-128 ................................................ H-1 
UNIX requirements and problems ...................2-24, 8-5 
UP ARROW key 

transmitting ASCII 28 to host............................. 6-12 

UPC 2 and 5-character supplemental codes ..............J-2 
UPC/EAN................................................................ 2-11 

about.......................................................................J-1 
Check digit .............................................................J-1 
compressed format............................................... 2-12 
default settings .......................................................2-11 
guidelines for use ....................................................J-2 
NSC and check digit ........................................... 2-11 
NSC's and check digits...........................................2-11 
numbering conventions ...........................................J-2 
supplemental codes ................................................2-11 
UPC-A - adding a country code..............................2-11 
UPC-A in 13 digit EAN format ..............................2-11 

UPC/EAN check digits - enabling transmission of 2-11 
UPC/EAN checksum character..................................J-3 
UPC/EAN Specifications...........................................J-1 
UPC/EAN Supplements -  enabling/disabling........ 2-11 
UPC-E Checksum Calculation...................................J-4 
UPC-E0 and UPC-E1.............................................. 2-12 
UPC-E1 -  enabling reading of................................ 2-13 
Upgrading firmware in Base,Relay or Terminal ..... D-1 
US Date Format ...................................................... 2-18 
USA/Canada/Mexico 

EPROM version identification.............................. 2-6 

Using Arrow Keys to transmit characters................. 2-7 
Using the bar code RF Terminal Setup Menu .......... 2-2 
Using the Demo Programs before programming...... 5-2 
Using the keypad to setup the RF Terminal ............. 2-3 
Using the Relay instead of the Base to communicate4-4 
Using the RF Terminal keypad ................................. 1-4 
Using the Scan Stand ...............................................M-1 
Utilities CD..................................................................1-8 

V 

Vehicle ID reading ....................................................L-3 
Version 

9075....................................................................... 6-6 

VIN reading...............................................................L-3 
Voice Cloning Cable #T15 ....................................... 7-5 
Voice message "command" ...................................... 6-2 
Voice message mapping............................................ 7-2 
Voice Message Operations ....................................... 7-1 
Voice message partitions - changing ........................ 7-2 
Voice Message Partitions............................... 2-19, 2-20 
Voice messages 

cloning from RF Terminal to RF Terminal .......... 7-5 

error conditions........................................................7-5 
playback ................................................................ 7-3 
record error messages for all situations ................ 7-2 

Voice Messages 

changing the time allotments.................................... 2-19 

Voice Operations selection on SETUP Menu .......... 7-2 
Voice Prompts 

helping to limit mistakes....................................... 7-1 

W 

Waiting for Base to Acknowledge............................ 8-3 
Waiting on Host Prompt ........................................... 8-3 
WAITING ON HOST PROMPT.............................. 3-2 
Waiting on Host Prompt problems ........................... 8-2 
Waiting on Host Prompt” ......................................... 8-3 
Wand vs. keypad entry.............................................. 6-3 
wanding variable data ............................................... E-4 
Wanding variable data .............................................. E-4 
WDTRI password ..................................................... 2-3 
What to do with data after a failure ...............................5-2 
What to do with data after an operator error............. 5-3 
why recharging doesn't work .................................. 2-18 
Why Use Voice Messages and Prompts? ................. 7-1 
Windows 95 com port setup .........................................8-6 
Windows ActiveX programming............................ 6-13 
Windows RF Loader program ................................. D-1 
Windows TCP/IP terminal programming............... 6-23 
Windshield Reading.................................................. L-3 
Wrong data................................................................ L-3 

X 

Xmit Setup/Voice Please Wait ................................. 7-5 
XON/XOFF 

changing ASCII characters to avoid conflict...... 6-11 

XP  - caution with connection pooling ..................... 8-2 

Y 

Year 

2000 compliance ................................................. 2-19 
displaying 4 digits............................................... 2-19 

YELLOW LED......................................................... 8-4 
YES/NO entry while scanning.................................. 6-3 

Z 

Zebra Cameo Magstripe input .................................. 6-3 
Zebra Cameo Printer ....................................... 6-33, C-3 

setup for use with RF Terminal .......................... 6-33 

Zebra Encore Printer ............................................... 6-34 
Zebra magstripe ........................................................ 6-4 

 

Содержание 701 RF




























































































































































Отзывы:

Нет отзывов

Похожие инструкции для 701 RF

Kollmorgen AKI-CDC-MOD-15T Installation Manuals preview
AKI-CDC-MOD-15T
Бренд: Kollmorgen Страницы: 36
POSIFLEX XT-3615 User Manual preview
XT-3615
Бренд: POSIFLEX Страницы: 20
Interflex IF-810 Quick Start Manual preview
IF-810
Бренд: Interflex Страницы: 8
Control Data Corporation CDC 721 Operator'S Manual preview
CDC 721
Бренд: Control Data Corporation Страницы: 154
Glancetron MSR JC-1290 KB series Operation Manual preview
MSR JC-1290 KB series
Бренд: Glancetron Страницы: 30
OKPOS I-POS Service Manual preview
I-POS
Бренд: OKPOS Страницы: 20
Uniwell HX-1500 Operation Manual preview
HX-1500
Бренд: Uniwell Страницы: 239
IVC Displays NP-800S User Manual preview
NP-800S
Бренд: IVC Displays Страницы: 30
Crestron CLTI- Function Manual preview
CLTI-
Бренд: Crestron Страницы: 6
Zte ZXA10 F660 User Manual preview
ZXA10 F660
Бренд: Zte Страницы: 117
Yeacomm YF-P11K User Manual preview
YF-P11K
Бренд: Yeacomm Страницы: 2
Aastra 6753 User Manual preview
6753
Бренд: Aastra Страницы: 63
National Instruments SCXI -1305 Installation Manual preview
SCXI -1305
Бренд: National Instruments Страницы: 14
Wasp Point of Sale Hardware Quick Start Setup Manual preview
Point of Sale Hardware
Бренд: Wasp Страницы: 2
MOTKA MK-200C User Manual preview
MK-200C
Бренд: MOTKA Страницы: 26
Jepower JP762A User Manual preview
JP762A
Бренд: Jepower Страницы: 9
NCR PX10 POS 7746 User Manual preview
PX10 POS 7746
Бренд: NCR Страницы: 82
Partner SP-1000 User Manual preview
SP-1000
Бренд: Partner Страницы: 52

Бренды по названию

Популярные бренды

Загрузить еще бренды