WORKMASTER GO-E2, Руководство оператора

Страница: 7 / 40

PH: 866.476.9217 6
II. OPERATION SAFETY
Safety must be considered a basic factor in machinery operation at all times. All rotating
power transmission products are potentially dangerous. Most accidents are the result of
carelessness or negligence.
It is the responsibility of the owner and operator to install, maintain, and operate the
parts or components manufactured and supplied by
WORKMASTER , in such a manner
as to comply with the Williams-Steiger Occupational Safety Act and with all state and
local laws, ordinances, regulations, and the American National Standards Institute
Safety Code (ANSI).
To prevent injury to yourself or others and/or damage to the equipment you should
adhere to the following basic safety instructions:
GENERAL SAFETY INFORMATION
1. Read carefully all Owner-Operator Guides and Manuals, Service Manuals,
and/or other instructions.
2. Always follow proper procedures and use proper tools and safety equipment.
3. Be sure to receive proper training.
4. Always use proper components in applications for which they are approved.
5. Be sure to assemble components properly.
6. Never use worn-out, defective or damaged components.
7. Practice good housekeeping at all times, and maintain good lighting around
all equipment.
8. Hand tools, although commonly used, are specialized for particular jobs.
Always use the right size and type of tool for the job being performed. Keep
tools in proper working condition, and discard any tools that are worn or used
beyond their useful life.