
26
OPERATING MANUAL
POWER GRID CONNECTION
Your vacuum system is pre-wired by the manufacturer. The number of volts and amperes
are found on the label on the switch and the motor housing. Please, take note of these
before connecting the vacuum system to the power grid. Use only correctly protected
power sources. THE FAILURE TO OBSERVE THIS CAN RESULT IN ELECTRICAL SHOCK, FIRE
OR A DEFECTIVE MOTOR.
The vacuum system must be connected to a properly grounded power source. If you
are not certain whether the respective outlet is grounded, have it checked by a qualified
electrician.
WARNING: IN THE EVENT OF IMPROPER GROUNDING, THIS VACUUM CAN CAUSE
POWER SURGES, ESPECIALLY WHEN USED IN DAMP ROOMS.
WARNING: IN ORDER TO AVOID ELECTRIC SHOCKS OR FIRE, HAVE DAMAGED
ELECTRICAL CORDS REPLACED BY A TECHNICIAN.
INSTRUCTIONS FOR GROUNDING
This machine must be grounded. In the event of a breakdown or malfunction, the
grounding is protection against electrical shocks. The cord on this machine is designed
to be grounded. The power plug may only be connected with a properly connected and
grounded outlet, which meets all local regulations.
WARNING: THE IMPROPER CONNECTION OF THE MACHINE GROUNDING CAN
CAUSE ELECTRIC SHOCKS. IF YOU HAVE ANY DOUBTS ABOUT THE CORRECTNESS
OF THE GROUNDING, HAVE IT CHECKED BY A QUALIFIED ELECTRICIAN.
DO NOT MODIFY ANYTHING ON THE ELECTRICAL CONFIGURATION OF THE
MACHINE. IF A DEFECT SHOULD ARISE ON THE ELECTRICAL CONFIGURATION, HAVE
THE AFFECTED PART REPLACED BY A TECHNICIAN.
ON-OFF SWITCH
The switching unit is found on the back of the motor housing. Start the vacuum by
pressing the ON switch. Switch it off by pressing the OFF switch. Make sure that children
never operate the switches.
1188909 BDA 3000 ASA.indd 26
10.03.15 12:01