
22
Illustration 6
Now, fasten the collector to the dust collection bag
supports. Make sure that the side opening is directed
toward the vacuum housing.
Screws for collector: 6 x hexagonal 8x20 mm plus washers
Illustration 7
The filter bag attachment is screwed on with the collector.
Illustration 8 / 8a
Now push the intake divider over the intake
connection on the cover plate of the vacuum
housing and secure the intake divider using the
enclosed screws. Never put the machine into
operation when this is not completely mounted!
Now, put one end of the connector hose on the
outlet connection of the vacuum housing and the
other on the divider. Secure both ends with hose clamps.
Illustration 9
The upper filter bag support can now be inserted in the
mounting and fixed in place. Place the dust collection and
filter bags on the divider and fasten them as illustrated.
After the bags are secured, the upper filter bag must be
hung on the support. Now, all that is needed is to connect
the vacuumto a grounded electrical outlet with the right
voltage.
1188909 BDA 3000 ASA.indd 22
10.03.15 12:01