Woodway 4Front, Руководство по обслуживанию

Страница: 72 / 97

72 05/2016 – SM-MT-EN-02
7.3 Calibrating the Speed
To adjust speed through the treadmill’s LCD or Color LCD display board, perform the fol-
lowing:
1.
Turn the treadmill display board ON.
2. Press ENTER-9-1-1 (in that order). The Diagnostic Mode menu will appear on the
display screen.
3. Press the FAST key until the treadmill has reached its top speed.
4. The treadmill’s actual speed will appear on the LCD screen. If the SPEED display an
actual speed do not match, use either the S3 or S4 calibration buttons to adjust ac-
cordingly.
5. Once the actual speed and set speed match, bring the treadmill back to 0 MPH.
6. Press the OFF button on the display twice to save the changes and exit Diagnostic
Mode.
To adjust speed through the treadmill’s LED display board, perform the following:
1.
Turn OFF the treadmill at the main power switch (at base of treadmill by power
cord).
2. Press and hold down the FAST key and flip the main power switch ON. The Diag-
nostic Mode menu will appear on the display screen.
3. Press the FAST key until the treadmill has reached its top speed.
4. The treadmill’s actual speed will appear on the TIME/PACE screen. If the actual
speed and set speed do not match, use either the S3 or S4 calibration buttons to
adjust accordingly.
5. Pull the emergency stop magnet from the display to save the settings.
6. Turn the treadmill OFF at the main power switch to exit Diagnostic Mode.
7.4 Calibrating Belt Movement
When the treadmill is set to 0 MPH, the belt may move slightly due to electrical vari-
ance. It is possible to adjust this movement through the treadmill’s display board.
If the belt movement does not stop after performing the appropriate steps with the dis-
play board, the belt will have to be calibrated through the drive board. Contact the
WOODWAY Service Center for assistance.
The procedure for calibrating belt movement differs slightly between models. To adjust
belt movement of the 4Front treadmill through the color LCD display, do the following:
1.
Turn the treadmill OFF and back ON again by the main power switch.
2. Press the ON button on the display board.
3. Press 9-2-2-ENTER (in that order).
4. Press either UP/DOWN incline key to stop the belt movement. Do not press the keys
too fast, as the treadmill may not respond.
5. Once the belt is at a complete standstill, press the OFF button on the display twice
to save the changes and exit Calibration Mode.
To adjust belt movement of the 4Front treadmill through the LED display, perform the
following:
1.
Turn the treadmill OFF and back ON again by the main power switch.
2. Hold down the INCLINE UP button and press the ON button on the display board.
3. Release both buttons.
4. Press the INCLINE UP button until the display reads “bCrP”.
5. Use either FAST/SLOW key to stop the belt movement.
6. Once the belt is at a complete standstill, press the PAUSE button to save the chang-
es. Turn the treadmill OFF at the main power switch to exit Calibration Mode.
Personal Trainer LCD
(All)
Standard LED &
Group Training
(All)
Personal Trainer LCD
4Front, Pro, Pro-XL
Standard LED &
Group Training
4Front, Pro, Pro-XL