Woodway 4Front Скачать руководство пользователя страница 46

Страница: 46 / 97

05/2016 – SM-MT-EN-02

Perform the following steps in order to properly reinstall the Desmo display:

Attach display housing to wire form using hardware removed above.

Re-attach all cables.

Test the new board. Make sure treadmill operates as expected without issues.

Re-install back cover using hardware removed above.

Re-install cup holders by sliding them down onto their posts and lining up the “T” on
the display with the slot on the cup holder.

6.2.2

Mercury/Path

Fig. 48 Display replacement, Mercury/Path

Display housing mounting screws

Display board mounting screws

Display housing

Display board

Standard screwdriver
Phillips head screwdriver
Perform the following steps in order to properly remove the Mercury/Path display:

Unplug treadmill from power source. Ensure that it cannot be turned back on.

Remove the 8 screws attaching the display assembly to the handrail (Pos. 1).

Carefully, remove the connectors that plug into the display.

Installation

Tools Needed

Removal

Содержание 4Front


































































































Результаты поиска

Содержание 4Front

Отзывы:

Похожие инструкции для 4Front

Бренды по названию

Популярные бренды

Woodway 4Front, Руководство по обслуживанию

Результаты поиска

Содержание 4Front

Отзывы:

Похожие инструкции для 4Front

Бренды по названию

Популярные бренды