Woodway 4Front, Руководство по обслуживанию

Страница: 29 / 97

05/2016 – SM-MT-EN-02 29
4.3.2 Brushless Motor Controller/Drive
 Digital Sensor Processor (DSP)-
based digital servo motor control-
ler
 Highly efficient operation
 4-quadrant operation
 Sinusoidal motor output (AC)
 15 Amp continuous (30-Amp max.
rating)
 Redundant zero start
 Redundant ramp rate
 Regenerative drive operation
 Pulse Width Modulation (PWM) tech-
nology

Insulated Gate Bipolar Transistor
(IGBT) technology
 Velocity-loop feedback (speed/torque
adjusted in ms)
 Built-in fault monitoring (over-
temperature, over-voltage, over-
current, ground fault, encoder loss,
short circuit, motor oscillation)
5 Assembly Instructions
5.1 Preparation
The treadmill can be delivered in various states of assembly. Disassembly/assembly may
be required for moves or relocation into other rooms.
NOTE
In WOODWAY performance and fitness treadmills, standard (inch) screws and
nuts are used, with few exceptions.
These are not compatible with metric fastening elements!
Due to the heavy weight of the device, it is recommended to install the treadmill as
close to its final location as possible.
Carefully dismantle the shipping crate. To do this, remove the screwed connections.
Remove protective foil from all packaged parts. Ensure that the surfaces are not dam-
aged by sharp objects (knife, etc.).
NOTE
It is recommended to have a second person assist in inserting the railing
tubes or with the assembly.
Preparation Steps