Woodway 4Front, Руководство по обслуживанию

Страница: 58 / 97

58 05/2016 – SM-MT-EN-02
 Standard screwdriver
 Phillips screwdriver
 Wrench,
9/16
” or ½”
 Wire cutters
 Ty-wraps
1. Unplug the treadmill from the power source. Ensure it cannot be turned back on
2. Remove the side covers (see Section 6.10).
3. If the treadmill has an electrical cover, remove the 6 screws holding the cover in
place and remove the electrical cover (Pos. 4, 5).
4. Cut the Ty-wraps that secure the wires from the handrail.
5. Unplug the wires and feed them into the hold in the handrail to prevent damage
during the handrail removal.
6. Using the 9/16” or ½” wrench, loosen the nuts on the clamps that hold the handrail
in place (Pos. 2, 3). They do not need to come completely off.
7. Slide the handrail and head assembly up out of the frame and set aside (Pos. 1).
1. Slide the handrail assembly into the clamps located inside the frame (Pos. 1).
2. Tighten the clamp nuts using the 9/16” or ½” wrench (Pos. 2, 3).
3. Re-attach the wires coming out of the handrail to the appropriate connections and
Ty-wrap them to the frame.
4. Re-install the electrical cover (if applicable).
5. Re-install the side covers (see Section 6.10).
Tools Needed
Removal
Installation