Woodward MicroNet TMR 5009FT, Инструкция по установке и эксплуатации оборудования

Страница: 9 / 95

Manual 26518V2 5009FT Installation/Hardware
Woodward 7
Chapter 1.
General Information
The technical documentation for the 5009FT control system consists of the following volumes:
Volume 1
—provides information on system application, control functionality, fault tolerant logic, control
logic, PID setting instructions, and system operation procedures.
Volume 2
—provides hardware descriptions, mechanical and electrical installation instructions, hardware
specifications, hardware troubleshooting help, and basic repair procedures.
Volume 3
—provides installation procedures for the 5009FT control’s personal computer based interface
software program (CCT), information on all CCT features and modes (Configure, Service and Run).
Volume 4
—provides details on installation and operation of the optional operator control station, if
provided with your system. It contains a list of the control’s Modbus ® * registers and tag names.
*—Modbus is a registered trademark of Schneider Automation Inc.
Active 5009FT System part numbers are covered in Volume 1 of this manual and in Appendix B.
This volume provides hardware description, installation, and troubleshooting information for the
Woodward 5009FT Control System. It includes:

A list of all system hardware

A description of all hardware

Mechanical installation instructions

Electrical installation instructions

Troubleshooting Guide, including diagnostic tests

Maintenance procedures (module replacement)
This hardware manual applies to all 5009FT control systems but does not include information that is
unique to your system only.
Appendix A – Control Wiring Diagram
Released