Wood-mizer LT15 M2 E11S, Инструкция по безопасности, установке, эксплуатации и техническому обслуживанию, Страница: 16 / 100

Safety & General Information
Blade Sizes
1
1-8 15doc120709 Safety & General Information
1.7 Blade Sizes
See Table 1-3.
Wood-Mizer TRU•SHARP™ offers three types of blades to provide efficient sawing for all
models of sawmills. The engine/motor size of your sawmill and the type of wood you saw should determine
which blade you choose for optimum performance.
See The Blade Handbook
for blade hook angle, tooth height, and tooth set specifications.
1.8 Cutting Capacity
See Table 1-4.
The log size capacities of the LT15 sawmills are listed below.
See Table 1-5.
The performance capacity of the LT15 sawmill is listed below. Peak cutting rates are
measured in 12” (30 cm) wide red oak and represent the capability of the sawmill only. Rates based on using
Tru-Sharp 1 1/4” x .042 blades.
Engine/Motor Size Recommended Blade For Sawing:
Softwood Hardwood Frozen or Hard-to-Cut
Wood
5 hp - 15hp
B275IH1030
B275IH741030 B375IH929
B375IH929
1
1
TRU•SHARP™ “F” blades use a 9/29 profile (9° hook angle and 29° back angle) and are de-
signed to cut frozen and/or extremely dense, hard-to-cut wood. Standard TRU•SHARP™
blades use a 10/30 profile.
16hp or more
B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
2
Customer may choose preferred blade.
B375IH929
1
Electric Motor
B376IH1030
B376IH741030 B275IH1030
B275IH741030
B376IH1030
B376IH741030
2
B375IH929
1
TABLE 1-3
Max.
Diameter
Max.
Length
1
1
Each additional bed frame segment adds approximately 195
cm ( 6’ 5” ) to length capacity.
LT15 S3
71 cm 5,4 m
LT15 S2
71 cm 3,5 m
LT15 M2
71 cm 5,2 m
LT15 M3
71 cm 7,9 m
TABLE 1-4
Model Cutting Rate
LT15 E11, G13, D10
16 ft. (3.3 m)/min.
TABLE 1-5