Caution!
With the combination blueMatic EAV + access control,
the power requirement must not to be fraught more than 2 A!
With the combination with frame power supply STV-NETZTEIL
RAHM. 12 V DC the power supply should be charged max.
permanently with 1,5 A and max. 2 A will be charged for 2 s!
Notice:
VdS acceptance:
Only with VdS-tested access control systems!
blueMatic EAV
5044744
34
Installation, Operating and
Maintenance Instructions
2
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
Access control systems
From the outside the door is opened via the access control system (transponder,
wireless remote control).
• 1 Reader / control unit (for flush-type box)
– mounting of the reader on the inside
• 1 antenna for exposed installation (90 x 90 x
13 mm, color white), cable of 2.5 m fixed at the
antenna (not extend cable)
– mounting of the antenna on the outside
• 1 antenna sticker, weatherproof, resistant to
UV light
• 3 transponder chips (key fob, color blue, are
unprogrammed)
• 2 progamming cards transponder (pro-
gramming card = green; delete-all card = red)
Transponder set EAV
T-HT TRANSPONDERSET T02
EAV BL
2410265