Important Notes
Important Notes
Manufacturer’s Certification
The modular ND69 POS Printer complies with the relevant safety regulations for data-
processing equipment, including electronic office machines, for use in the office
environment. Should you have any doubts about the permissibility of installation in a
certain environment, please contact Wincor Nixdorf Customer Service.
If the device is brought into the room of operation from a cold environment, dewfall
(condensation) can occur. Before starting up, the device must be completely dry; it is
therefore necessary to observe an acclimatization period of at least two hours.
This device is equipped with a safety-tested power cable and may be connected only
to a grounded plug socket.
When setting up the device, ensure that there is easy access to the power socket on
the device and/or to the grounded-contact mains socket.
Position the leads and cables so that no one steps on or trips over them.
To disconnect the device from the supply voltage completely, switch off the device
and disconnect the power plug.
Make sure that no objects (for example, paper clips) or liquids get into the inside of
the device. Electric shocks or short circuits can be caused in this way.
Never plug or unplug data communication lines during thunderstorms.
Protect the ND69 from vibrations, dust, moisture and heat.
The device should only be transported in its original packing (protection against
knocks and bumps).
In emergencies (e.g. damaged housing or power cable, entry of liquid or foreign bo-
dies), the device must be switched off and unplugged immediately, and Wincor Nix-
dorf Customer Service should be called.
Always dispose of used parts, such as printer ribbons, in an environmentally safe
manner.
The device may be repaired by authorized qualified personnel only. Unauthorized
opening of the device and inexpertly carried out repairs will not only seriously
jeopardize the safety of the user, but also lead to cancellation of all warranty and
liability agreements.
Important Notes
Manufacturer’s Certification
GB - 2
