ND69 Mode
receipt station
EPSON-TM930 Mode
receipt and journal station
If a control command ESC C n or one with n>0 has been received, the
document is transported out by the number of lines indicated. After the
transport, the station remains selected.
If the set document output length, which was set using ESC C n, is
larger than the distance for the first line, the document is transported
out and the station is changed in the manner described above. The
yellow LED “Document” is switched off.
BEETLE/60 Mode
If no control command ESC C n or one with n = 0 has been received
beforehand, the document is transported out as far as the paper edge.
The transport rolls, however, continue to grip the document.
The document station remains selected. The yellow LED “Document”
remains switched on. If the document is pulled out of the printer from
this position, a user error is reported when a V.24 interface is connected.
If a Centronics interface is connected, the paper end signal appears.
If a control command ESC C n with n>0 has been received beforehand,
the document is transported out by the specified number of lines.
The document station remains selected after the transport. If the output
length specified by ESC C n is greater than the distance to the first line,
the document is transported out to the paper edge. The document
station remains selected. The yellow LED remains switched on.
CR
Function:
Print and Carriage Return
Code:
<0D> H
Description:
Prints the data located in the buffer and sets the next printing position
on the left edge of the selected printing station.
If AUTOFEED is switched on by means of DIP switch 2, a line feed is
executed, possibly dependent on the interface signal AUTOFEED/N of
the parallel interface.
Control Sequences
Description
GB - 43
