Green Paper Feed Button
When the cover of the printer is open, the green paper feed button for the receipt and
journal stations can be used. This button makes the inserting of a new roll of paper much
easier in that it changes the location of the feed rolls mechanically - in addition to the
electrically induced line feeds.
If you press the switch after the cover has been opened, paper will only be fed at the
station where the paper end sensor issues the message “paper present”. If there is paper
at both stations, it will be fed at both stations simultaneously.
If there is no paper present at one printing station, the feed motor at this station switches
on after the cover has been opened; it thus removes paper that might be left over.
If paper is inserted at a printing station after the cover has been opened, the feed motor
of this station switches on at a lower speed.
If the paper end sensor of a printing station issues the messsage “paper present” after the
paper is inserted, pressing the paper line feed button will produce a line feed at this
station only.
If paper is inserted at the receipt station, the paper is automatically fed further forward,
and thus tensioned, when the cover is closed; it is subsequently cut in order to have an
evenly cut edge.
The paper line feed button is only active when the cover switch issues the message
“cover open”.
Changing the Receipt Roll
If a red stripe appears on the printed receipt, or the “paper end” LED lights up on the
control panel, a new receipt roll should be inserted. Change the receipt roll as follows:
Operation of the ND69 POS printer
Changing the Receipt and Journal Paper
GB - 23
