Default:
Describes the standard values.
Example:
Examples of the command in use.
Description of the Control Characters and Sequences
LF
Description
Function:
Print and Line Feed
Code:
<0A> H
Description:
Prints the data located in the buffer and executes a line feed.
This command sets the next printing position on the left edge of the
selected printing station.
Remarks:
The command LF should only be used for a line feed of one line. For
reasons of speed, the command ESC d should be used for line feeds
of more than one line.
The line spacing of one line feed can be set with the commands
ESC c1, ESC 2 and ESC 3.
Default:
1/6"
FF
Function:
Print and Document Transport
Code:
<0C> H
Description:
Prints the data located in the buffer and then transports a document
which was previously inserted.
Remarks:
The command only functions when the document station has been
activated; otherwise, it is ignored.
ND69 Mode and EPSON-TM930 Mode
If no control command ESC C n or one with n=0 has been received, the
document is only transported out. Depending on the set compatibility,
the station is changed:
Description
Control Sequences
GB - 42
