Tab positions :
Interval of 8 characters (character no. 8, 16, 24...)
With default character density 14 cpi in the ND69
mode and BEETLE/60 mode, and 11.7 cpi in the
EPSON-TM930 mode.
Paper widths :
Receipt and Journal 76mm, Document 210mm
Logo:
no logo loaded
On-line key:
disabled
in BEETLE/60 mode
enabled
in ND69 mode
enabled
in EPSON-TM930 mode
Paper end:
receipt-journal-document end
in BEETLE/60
and ND69 mode
signal, parallel
receipt-journal end
in EPSON-TM930
interface:
mode
Remarks:
The default values depend on the positions of DIP switches 2 and 3
(BEETLE/60 mode, ND69 mode or EPSON-TM930 mode)
This command - in that it bypasses the reception buffer - is executed
immediately following reception.
Any data in the reception buffer that have not yet been processed are
erased. If the document station was selected beforehand, this command
advances the document and switches off the yellow “document” LED.
The print head returns to the home position.
ESC C n
Function:
Select Document Output Length
Code:
<1B> H <43> H <n>
Range:
0
≤
n
≤
127
Description:
The number of lines by which the document is transported at the
document station by the command FF is set.
No output length is determined with n=0; the document is transported
out of the printer. The output of the document from the printer depends
on the compatibility mode (see control sequence FF):
ND69 mode, EPSON-TM930
The document is transported out
mode
BEETLE/60 mode
The document is transported out to the
paper edge. The transport rollers, how-
ever, continue to grip the document.
Description
Control Sequences
GB - 50
