https://www.XPOtool.com
Item 63003
Page 15
The Tool Experts
01 2022
-1
5. Unclip the return tube from the suction tube
and place it into the waste container. Turn the
PRIME/SPRAY
knob to
PRIME.
6. Turn water supply on. Turn the pump
ON (l).
Wa-
ter will flow into the suction tube and out through the
return tube. Let the pump run for a few minutes to
allow the return tube to be completely flushed.
Leave pump running during steps 7 and 8.
7. Place the original material container next to the
waste container. Aim the spray gun into the side
of the original material container and hold the trig-
ger.
8. While pulling the trigger, turn the
PRIME/SPRAY
knob to
SPRAY
to purge material from the hose
back into the original container.
Keep holding trigger through next steps.
9. When cleaning solution comes from the spray
gun, keep holding the trigger and aim the spray
gun into the side of the waste container.
10. Trigger the gun until the fluid coming out of the
gun is clear. You may need to empty the waste
container and continue flushing.
11. Turn the
PRIME/SPRAY
knob to
PRIME
and
trigger gun once more to relieve pressure.
Spray into waste container
Spray material into original container
Move on to “Cleaning the spray gun compo-
nents”.
