https://www.XPOtool.com
Item 63003
Page 16
The Tool Experts
01 2022
-1
Clean-up for oil-based materials
1. Lock the gun and remove spray tip assembly.
Submerge suction set into a bucket with appro-
priate cleaning solution.
Bucket with cleaning solution
2. Place a waste container next to the original ma-
terial container. Aim the spray gun into the side of
the
original material container
and hold the trig-
ger.
3. While pulling the gun trigger, turn the pump
ON
(l),
and turn the
PRIME/SPRAY
knob to
SPRAY to purge material from the hose back into
the original container.
Keep holding trigger throughout the next
steps.
•
Hold trigger.
•
Turn pump ON (I).
•
Turn PRIME/SPRAY knob to SPRAY.
4. When cleaning solution comes from the spray
gun, keep holding the trigger and aim the spray
gun into the side of the waste container
(earth
gun with a metal container if flushing with
flammable solvent).
5. Trigger the gun until the fluid coming out of the
gun is clear. You may need to dispose and obtain
new cleaning solution.
6. Turn the
PRIME/SPRAY
knob to
PRIME
and
trigger gun once to relieve pressure.
Spray cleaning solution
into waste container
Spray material into original container
Move on to “Cleaning the suction set.”
