https://www.XPOtool.com
Item 63003
Page 7
The Tool Experts
01 2022
-1
PRIME and SPRAY. The PRIME/SPRAY knob is also used to relieve pressure built up in the
spray hose (see
“Pressure relief procedure”).
•
Pressure control dial
The pressure control dial regulates the amount of force the pump uses to push the fluid.
•
Oiler
The oiler is designed to provide lubrication to the fluid section of the pump.
•
Pusher stem
The pusher stem is designed to keep the inlet valve open and from sticking due to dried mate-
rials.
Technical specifications
Max. capacity
(
ℓ
⁄
min
)
1,5
Power source
(W)
1010 (universal motor)
Min. current requirements
(A)
15 on 230
V, 50
Hz
Safety features
Spray gun trigger lock and pressure diffuser; built-in tip safety guard;
PRIME/SPRAY knob for safe pressure release.
Capability
Sprays a variety of paints, oil base latex, primers, stains, preserva-
tives, and other non-abrasive materials, including pesticides and liq-
uid fertilisers.
This pump should not be used with textured materials, block filler, or asphalt sealer.
This pump is available in this machine. All information given for the stand model applies to the
cart models except where indicated.
Important!
Some of the graphics in this manual may not exactly match your sprayer and spray gun. All
information and instructions given in this manual applies to all models except where noted.
№
Name
№
Name
1
On/off switch
6
Motor, transmission components
2
Suction set filter
7
Spray tip
3
Suction tube
8
Spray gun
