https://www.XPOtool.com
Item 63003
Page 17
The Tool Experts
01 2022
-1
Clean-up – cleaning the suction set
1. Lock the gun and turn the pump
OFF (O).
2. Remove the suction hose and the return tube
and clean it using the appropriate cleaning solu-
tion. You should also wipe the threads of the inlet
nut
(a)
and remove and clean the solution set inlet
filter.
3. When the suction set is clean, thread the suc-
tion tube back into the inlet valve, and replace
the return tube onto the return tube fitting. Re-
place clip.
4. Submerge the suction set into a bucket of
NEW
cleaning solution.
5. Turn the
PRIME/SPRAY
knob to
PRIME.
Turn the pump
ON (l),
and trigger the gun once
into a waste container to relieve pressure.
6. Let the pump circulate cleaning solution through
the suction set for 2–3
min. Turn the pump
OFF.
Note!
In case you have used oil-based mate-
rial, you must flush the pump again with water
to prepare it for storage.
Move on to “Cleaning the spray gun compo-
nents.”
