https://www.XPOtool.com
Item 63003
Page 5
The Tool Experts
01 2022
-1
•
The power cord must be connected to an earthed circuit.
•
Always flush unit into a separate metal container, at low pump pressure, with the spray tip re-
moved. Hold the gun firmly against the side of container to earth the container and prevent static
sparks from forming.
•
Follow the material and solvent manufacturer’s warnings and instructions. Know the contents of
the sprayed paints and solvents being sprayed. Read all Material Safety Data Sheets (MSDS)
and packaging labels provided with the paints and solvents. Follow the paint and solvent man-
ufacturer’s safety instructions.
•
Take extreme care when using materials with a flash point below 21
℃
(70
℉
). The flash point is
the temperature at which a liquid can produce enough vapours to ignite.
•
Plastic can cause static sparks. Never use plastic to cover the spray area. Do not use plastic
drop cloths when spraying flammable materials.
•
Use the lowest pressure possible to clean the equipment.
•
Do not spray onto pump assembly.
DANGER:
EXPLOSION HAZARD DUE TO INCOMPATIBLE MATERIALS
Will cause property damage or severe injury.
Prevention
•
Do not use substances containing bleach or chlorine.
•
Do not use halogenated hydrocarbon solvents such as bleach, fungicide, methylene chloride,
and 1,1,1-trichloroethane. They are not compatible with aluminium.
•
Contact your coating supplier about the compatibility of the substances used with aluminium.
DANGER:
GENERAL SAFETY INSTRUCTIONS
Can cause severe injury or property damage.
Prevention
•
Read all instructions and safety precautions before operating the tool.
•
Follow all appropriate local, national, and international codes governing ventilation, fire preven-
tion, and operation.
•
Use only manufacturer authorised parts. The user assumes all risks and liabilities when using
parts that do not meet the minimum specifications and safety requirements of the spray pump
manufacturer.
•
Before each use, check all hoses for cuts, leaks, abrasion or bulging of the cover. Check for
damage or movement of couplings. Replace the hose immediately if any of these conditions
exist. Never repair a paint hose. Replace it with another earthed high-pressure hose.
•
All hoses, fittings, and filter caps must be secured before operating the spray pump. Unsecured
parts may eject at great force or leak a high-pressure fluid stream causing severe injury.
•
All hoses, swivels, guns, and accessories must be pressure rated at or above 206.8
bar
(3000
psi).
•
Do not spray outdoors on windy days.
•
Wear clothing to keep paint off skin and hair.
•
Do not operate or spray near children. Always keep children away from the equipment.
•
Do not overreach or stand on an unstable support. Always keep effective footing and balance.
•
Stay alert and watch what you are doing.
•
Do not operate the unit when fatigued or under the influence of drugs or alcohol.
Important electrical information
Notice!
This machine is provided with a non-resettable thermal overload.
•
Always disconnect the motor from the power supply before working on the equipment.
•
The cause of the overload should be corrected before restarting. Take unit to service centre.
