32
WIKA operating instructions, model CPH6200
EN
11221780.02 04/2019 EN/DE
2. Press
[STORE/QUIT]
button once more.
⇒
Recording starts.
⇒
With each recording, the display will shortly show
“St.XXXX”
. Here, XXXX is the
number of the data set 1 ... 4,000 or 1 ... 10,000.
⇒
If the logger memory is full, the display will show:
⇒
The recording will be stopped automatically.
With the low-power-logger function “
Lo
.
Po
=
on
”, the instrument switches
itself off as soon as the logger memory is full.
Stopping the logger recording
1. Press the
[STORE/QUIT]
button briefly.
⇒
A confirmation prompt then appears:
2. With the
[MIN]
or
[MAX]
button, select the desired function.
The following functions can be selected:
Stop data logging
Do not stop data logging
3. With the
[STORE/QUIT]
button, confirm the selection.
4. Press the
[SET/MENU]
button.
⇒
Return to main menu.
If, during a cyclic data logging, the measuring instrument is switched off, you
will automatically be asked whether the data logging should be stopped. The
instrument can only be switched off after the recording has been stopped.
The auto power-off function is deactivated during recording!
Clearing logger recording
1. Press the
[STORE/QUIT]
button for 2 seconds.
⇒
The display shows “
Lo66 rvn
”:
6. Commissioning, operation
