28
WIKA operating instructions, model CPH6200
EN
11221780.02 04/2019 EN/DE
6. Commissioning, operation
6.4.10 Alarm (
AL
.
)
There are 3 possible settings: off =
“
AL
.
oFF
”
, on =
“
AL
.
on
”
, or on =
“
AL
.
no
.
So
”
.
Under the following conditions, an alarm is given when the alarm function
“
AL
.
on
”
or
“
AL
.
no
.
So
”
is active:
■
Value is below lower alarm limit
“
AL
.
Lo
”
or above upper alarm limit
“
AL
.
Hi
”
.
■
Sensor error (
Sens-Erro
)
■
Low battery,
'
bAt
'
■
Err
.
7
: System error
In the event of an alarm, the display flashes and the instrument emits a beeping sound. If
the serial interface is used, the 'PRIO' flag is set.
6.4.11 Real-time clock (
CLOC
)
The real-time clock is needed for the time allocation of the logger data. If required, check
the settings.
Checking the real-time clock
1. Press the
[SET/MENU]
button for 2 seconds.
⇒
The main menu
“
SEt
”
is accessed.
2. Keep pressing the
[SET/MENU]
button until
“
SEt-CLOC
”
is displayed.
3. With the
[TARA]
button, select the
“
CLOC
”
parameters.
4. With the
[MIN]
or
[MAX]
buttons, enter the time.
5. With the
[TARA]
button, select the
“
dAtE
”
parameters.
6. With the
[MIN]
or
[MAX]
buttons, enter the day and month.
7. With the
[TARA]
button, select the
“
YEAr
”
parameters.
8. With the
[MIN]
or
[MAX]
buttons, enter the year.
9. With the
[STORE/QUIT]
button, confirm the entry.
10. Press the
[SET/MENU]
button.
⇒
Return to main menu.
After changing the battery, the menu for setting the clock is automatically started after
switching on the instrument.
6.5 Operation of the logger function
Generally, the instrument supports two different logger functions which one activates via
the main menu. After activating the data logger in the main menu, the arrow is shown at
'Logg'
in the main display. Subsequently, recording can be started as follows:
“
Func-SToR
”
▶
Press
[STORE/QUIT]
button.
⇒
A measuring result is recorded in each case.
