Kunststoffschweißtechnik
Contents
08.10.14 Working
instructions
WIDOS RSC 2000
Page 6 of 63
1. Description of the product
This chapter gives important basic information about the product and its prescribed use.
All technical details of the machine are put together as a general arrangement.
1.1. Usage and purpose-oriented use
The WIDOS Saw RSC 2000 is special machinery for the straight cutting plastic pipes up to Ø
2400 mm, and an angle of max. 45° on both sides resp. 67,5° on one side, in the way
described as follows.
All use going beyond is not purpose-oriented.
The purpose-oriented use includes also that a sufficiently dimensioned, operational suction
plant is connected to the machine.
The described plastic band saw may only be operated, maintained and repaired by persons
who are trained and informed about the dangers.
The machine is a workshop machine and not suitable for operation in hazardous locations.
It is forbidden to cut wood and sheets made out of wood (e.g. pressboard).
The manufacturer is not responsible for any damages caused by inexpert handling or
operation.
For personal injuries, material and immaterial damages resulting herefrom, only the user is
responsible!
Also part of the purpose-oriented use is
respecting all the indications of the working instructions and
performing the inspection and maintenance work.
1.2. Safety
measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons being in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety
regulations must be necessarily adhered to.
1.3. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the according European standard specifications.
The development, manufacturing and mounting of the machine were made very carefully.
