Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
08.10.14 Working
instructions
WIDOS RSC 2000
Page 21 of 63
Insert the loose clamping belt end into the belt winder.
Pull the clamping belt manually thus far that the belt
encloses the pipe loosely.
Make sure that you still may tension the belt by at least
one turn but also observe that the belt protrudes from
the belt winder below by at least 0,5 m.
Now clamp the pipe by .
Attention!
Do not deform thin-walled
pipes.
After the cutting release the pipe clamping by .
Belt winder
