Kunststoffschweißtechnik
Starting
and
operating
Chapter 5
08.10.14 Working
instructions
WIDOS RSC 2000
Page 30 of 63
Shut off the laser by
.
Shut off the vacuum by
.
Release the pipe clamping by both pipe clamping buttons and in addition release the
clamping belts manually.
Remove the pipe pieces and the remaining chips e.g. by vacuum.
C u t t in g is c o m p le t e d .
In case of pipes with angles >45° to 67,5°, you must first cut the stub angle
→
32,5° to < 45°, afterwards swivel the saw to the opposite direction and cut the
acute angle.
